Make sure the plates are not touching each other. Poor quality stainless steel used in cutlery or saucepans. Load detergent correctly in the dispenser. Brown spots or pitting of stainless steelĭetergent being thrown over cutlery and saucepans. Remove spots with silver polish and rewash. Pitting of stainless steel Prolonged contact with salty or highly acidic foods.
Not enough detergent used or detergent is old and has gone hard. The washing program selected is too gentle. Put dishwasher through a complete cycle using a de-scaler (available from Electrolux Spare Parts) followed by a cycle using Finish powder in the dispenser (dishwasher must be empty during both operations). Dirty inside dishwasher Could be calcium build up from water supply (white film). Remove upper basket to unblock holes in spray arm. Detergent left in dispenser Upper spray arm holes blocked. Detergent either will not dissolve or will not come out Upper basket spray arm is blocked. Delay start - cannot cancel Can continue pressing delay start button until passed the maximum time (19 hours on Westinghouse "J" series). Refer to instruction book for a list of items not suitable for dishwashers. When buying new dishes make sure that they are dishwasher proof. Damaged items in dishwasher Certain items should not be washed in the dishwasher as they are not dishwasher proof. Cycle time too short (Westinghouse "J" Series) Rinse/hold program is selected (Westinghouse "J" series). Cycle time too short Incorrect program selected. Cycle time too long Hot or cold fill selected (if applicable). Cycle taking too long (Westinghouse "J" series) Incorrect program selected for size of load. Must use rinse aid and on Westinghouse "J" Series, if Eco Program was used, we recommend using a higher energy program. Cutlery not drying Poor loading in cutlery basket. Click when door is opened This is the light switch activating.
0 kommentar(er)
